|
IR Lights, etc |
 IR Illuminators
|
 | IR 60 Waterproof IR illuminator, up to 20m (Black colour)
|
| IR 70 Waterproof IR illuminator, up to 30m (Black colour)
 |
| IR100 Waterproof IR illuminator, up to 70m (Black colour)
|
Supplied with bracket |
|
more info >> |
 |
|
TV to VGA convertor
AVerDiGi TV2VGA allows your DVR to display video clips on your
TV and VGA monitor at the same time.
TV2VGA changes any CCTV composite
or video signal from DVR or CCTV monitor into a VGA output
compatible with computer monitors,
eg., LCD TFT -
Use a TFT monitor with this convertor to
view any camera or DVRHi-resolution VGA display up to 1280x1024
|
| Flicker-free by advanced frequency modifier
|
| Plug & play, no more complication
|
| Compact and light for all your installation
need |
More info>>
| £39 |
|
 |
Make any camera a network camera - easy set-up
more info >>
| £95 |
|
 |
Control your TV, DVR,
VCR, satellite receiver or audio installation from a different place in your
house even through walls and floors - using your own remote control. The
receiver picks up the IR from your remote, converts it to radio and beams it to
the receiver. This then converts the radio signal back into IR to control your
devices. Really useful and very easy to set up.
(433MHz) |
£22 |
|
 |
This twin phono adaptor is ideal for coupling and extending leads and audio/video phono leads etc. Ideal for joining 20m ext cables |
£1 |
|
 |
| Scart adapter AV/phono to scart connector
|
Included with camera kits |
£1.50 |
|
| |
BNCs |
|
|
 |
| BNC male to RCA / Phono female connector
|
| £0.75 |
|
 |
| BNC female to RCA / Phono male connector
|
| £0.75 |
|
 |
| BNC female to BNC female connector [joint to
connect BNC to BNC cable] |
| £0.75 |
|
 |
| BNC male to RCA / Phono male connector
|
| £0.75 |
 |
 |
| BNC Male to RCA Male cable 1m |
| £1.50 |
|
 |
| BNC crimp |
| £0.50 |
|
 |
| BNC Male to BNC Male connector |
|
£1.50 |
|
| |
| BNC M to BNC M cable 1m |
| £1.50 |
|
 |
| DC Plug |
|
£0.40 |
|
 |
|
Terminal Block converter DC-JACK to Terminal Block converter,
easy for installation.
 |
| £0.35 |
|
| |
BALUNs |
|
|
 |
| Balun single - RJ45 modular sockets to BNC plug with two screw terminals on case |
| £5 |
|
 |
| Balun single FUM T1 - Twisted pair
transmission - to BNC plug with two screw terminals on case
RECOMMENDED
expand
information |
| £5
10 x £40 |
|
 |
| Balun 4 way FUM T4 - Twisted pair
transmission - to BNC plug with 8 terminals on case
information |
| £17
£28
PAIR |
|
  |
| Balun single PAIR FUM T1P - Twisted pair
transmission Video and POWER - to BNC plug with two screw terminals on case
information |
|
£15
PAIR |
|
| |
Modulators |
|
|
 | Modulator
Use this UHF modulator to send video and audio signals from your camera, video processor or computer into the aerial socket of a conventional TV. Accepts standard video and audio signals via phono connectors and produces an output on UHF channel 36. Battery or external supply powered (input voltage requirement anything between 3 and 18V DC ie almost any camcorder battery or power supply, or mains adaptor). Specification: Output level 74dBuV; Video modulation AM; modulation: PAL I Power requirements: 3–18V DC @ 25mA.
|
£17 |
|
 | RF through modulator. Designed to be put in-line with aerial in and out connections, the video and audio signal can then be put into any channel (from 30-40) desired. Ideal for use with CCTV security cameras and VCRs without RF output. Power supply (UK mains adaptor) included.
|
£22 |
|
 | The Wideband Modulator enables a camcorder, security camera, DVD, VCR or any other device with AV (audio video) output to be connected to the aerial socket of a TV. It can be left permanently connected and used to distribute signals to other TV's via the RF aerial cable. The AV signal can be positioned on any vacant RF channel between 21 and 69. This means, for example, that the signal from a security camera could be introduced into the aerial lead and viewed in the same way, and as easily, as any normal broadcast signal. It is supplied complete with a secure snap-in clip for easy fixing onto skirting boards & lofts etc. An additional feature of the unit is that because it uses dip switches, the settings will be saved in the event of a power failure. Supplied complete with UK mains adaptor.
* Composite video plus audio input
* Scart input (can be used as buffered loopthrough output)
* RJ45 & RJ11 camera inputs
* PAL I/G switchable
* Switchable test signal
* Phase Lock Loop ensures channel accuracy without drift
* Snap-in secure mounting bracket
* Aerial loopthrough
* Compact size (125mm x 61mm x 39mm)
|
£35 |
|
| |
Microphone |
|
|
 |
will connect with ANY camera Not waterproof Requires only one power source when used with camera, power loop through |
£12.50 |
|
 | Mini-Transmitter see Wireless Trouble with difficult cable run - this is the answer! |
|
|
 |
| Battery Packs for: Including connector to 2.1mm DC plug
|
8 x 1.5 AA 12V (shown in photo) |
£5 |
|
 |
| Cigar to 2.1mm DC (car socket) |
| £4.50 |
|
 |
| Sign Plastic 210mm x 300mm
|
| Sign Plastic 300mm x 420mm |
| £4
£6
|
210mm x 300mm
300mm x 420
|
 |
| Sign Hard Plastic (3mm thick) 265mm x 400mm Yellow |
| £9 |
|
 |
| Cable stripper |
| £8 |
|
 |
| Crimper |
| £19 |
|
 |
12V rechargeable battery pack fitted with the universal 2.1mm plug.
Includes charger (UK Mains plug only)
Ni-mh - means no 'memory effect'
Compact small size
2000mAH - for long run time
Charge and discharge up to 1000 times
|
£29 |
|
 |
Features
1. Applying Japanese Lithium Ion
chip.
2. Small resistance.
3. Big capacity.
4. No memory effect.
5. Long using life.
6. Multi-safety inside circuit
design, which can prevent over charge, over release and over
current.
Application:
This unique rechargeable battery
pack is ideal for wireless ccd camera, transmitter and
receiver use, can also combine with wired CCD hidden camera
and micro video recorder for professional surveillance
equipment.
Specification :
Input Power:(charging Power): DC 12V.
Output Power: DC12V; 1800mAh.
Size : 9.8(L) x 6.0(W) x 2.2(H) cm.
Gross Weight: 0.28 kgs.
Package:
Each set including one Li-battery
pack, one charger and one power cable.
| £29 |
|
 |
| AV Distribution
Amplifier FOUR WAY |
A distribution amp will take the audio and
video signal from one device and split it into a number of
different signals to feed to other devices. Internal
electronics processing buffers the signal so that each
output maintains the quality and clarity of the original
input.
The distribution amplifier has one set of inputs
for composite video, s-video and stereo audio and
four identical sets of outputs,
each output being indistinguishable from the input.
Uniquely, the Distribution Amp also has a switchable
line drive feature, giving the ability to send audio and/or
video over much longer cable runs than normally possible (up
to 100m dependant on cable). It works by applying a signal
boost with emphasis on higher frequencies and use of
wideband ICs with very low output impedance.
The KDA may be daisy-chained, that is to say the output of
one KDA may be fed into the input of another. Used in such a
configuration, five KDAs may be used to provide up to 16 AV
outfits from one AV input.
This product is ideal for:
Sending an AV signal to multiple displays
Sending an AV signal down a long cable run (up to 100m with
the right cable)
Making up to four simultaneous recordings from one source
Sending line level audio to amplifiers in other rooms
TECHNICAL SPECIFICATION:
Power: 12-18v DC @ 300mA or greater. (UK adaptor supplied)
Video bandwidth: 50MHz distortion: <50db up to 10Mhz
|
£71.50 |
|
| |
Monitors |
|
|
 |
| |
|
 |
| |
 |
| |
Brackets |
|
|
| |
| |
|
| |
DOME Accessories and Brackets |
|
|
 |
| |
|
| |
Controllers |
|
|
| |
| |
|
| |
Housings |
|
|
| |
| |
|
OLD
OLD
020 30515202 (UK)
(sales only)