|
| | Geovision Optional 8 cam or 16 cam available | 
The Geovision DSP card is a high performance real time display card that works conjunctionally with the GV series video capture card. With the addition of DSP card, you can now display live video from 8 or 16 cameras at 30 fps NTSC or 25 fps PAL quality. The TV-Out connector allows you to feed real time video on to a TV display. 8 Camera £155   DSP 8 cam new 16 Camera £260 | Specification | Interface | 40 pins IDE connector | TV output | RCA connector x 1 | Number of channels | 8, 16 | Display rate | GV-DSP-8 | 240 fps | GV-DSP-16 | 480 fps | Video Resolution | NTSC | 640x480 | PAL | 720x576 | Compatible Models | GV-250, GV-600, GV-650, GV-750, GV-800, GV-900, GV-1000 | Dimension | GV-DSP8: 191mmx99mm, GV-DSP16: 204mmx101mm |
 | 
£155 GVA16 Audio NEW | Specification | Interface | 9 pins D-Sub connector x 2 | Number of channels | 16 | Audio Compression | ADPCM 8 bit Mono | Compatible Models | GV-1000 | Dimension | 120mm x 91mm |
 | 
£25
| GV-NET is a device that converts RS-232 to RS-485. To be connected to COM1 or COM2 of your computer.
How to connect How to connect PTZ | Specification | RS-232 to PC | RS-232 to PC 9 Pin male-female cable | RS-485 + | Connect to GV-IO / PT-811 RS-485+ or Pelco, Ademco, Lilin Dome camera RS-485+ | RS-485 - | Connect to GV-IO / PT-811 RS-485 - or Pelco, Ademco, Lilin Dome camera RS-485 - | DC IN | Power Adaptor DC 5V , 1000mA Inner Positive | Communication | To PC : RS232, 9600. To Output : RS485, 9600 | Operation Temperature | 0 to 50 degree C | Humidity | 5% to 95% (non-condensing) | Dimension | 104 (W) *70 (H) *32 (D) mm |
|  £35 | The GV-IO is a 8 point digital input and 16 point digital output controller. The dry relay contacts provide an interface to your external devices such as sensors or detectors. | Specification | INPUT | Input | 8 | Input Signal | 0-5 V DC (floating) | High State | 5V | Low State | 0V | Wiring Label | GND, DI 1~DI 8 | OUTPUT | Output | 16 | Output Circuit | TTL Open Collect | Wiring Label | +5V-1, DO 1-1 ~ DO 8-1 | +5V-2, DO1-2 ~ DO 8-2 | Communication | RS485, 9600 bps | RS-485+ | Connect to GV-NET RS-485+ | RS-485- | Connect to GV-NET RS-485- | DC IN | Power Adapter DC 5V, 2A Inner Positive | Environmental
Condition | Operation temperature | 0~50 degree C | Humidity | 5%~95% (non-condensing) | Dimension | 202(W) x 166(H) x 39(D) mm |
|  £30 | The GV-Relay is a relay output module with 8 points relay output interface. This device is to actually control your alarm or PTZ cameras and connects to the control source of GV-IO output.
| Specification | Relay Output | RL1~RL8 | Relay Control Source | +5V, DO1~DO8 connect Output of GV-IO | Relay Status | Normal Open | Relay Capacitance | P6A / 250V AC; 10A / 125V AC; 5A / 28V DC | Relay ON Time | 8ms | Relay Off Time | 5ms | Dimension | 202(W) x 166(H) x 39(D) mm |
|  More information >>£159 | The GV-Data Capture is an external device for converting Point of Sales (POS) transaction data to GeoVision Digital Video Surveillance Systems. Information sheet | Specification | Input | RS-232 from PC | DB9 Female | Parallel Port from PC | DB25 Male | Output | RS-232 to Printer | DB9 Male | Parallel Port to Printer | DB25 Male | Parallel Port to PC | DB9 Male | RS-485+ | Connect to GV-NET RS-485+ | RS-485- | Connect to GV-NET RS-485- | Communication | RS232 from PC | 1,200bps~115,200bps | Parallel port from PC | SPP / Normal | RS-232 to DVR / RS-485 | 1,200bps~115,200bps | DC IN | Power Adapter DC 5V, 2A Inner Positive | Environmental
Condition | Operation temperature | 0~50 degree C | Humidity | 5%~95% (non-condensing) | Dimension | 160(W) x 116(H) x 30(D) mm |
|   | The GV-NET Card is an interface converter that can be installed inside a PC. £18 How to connect How to connect PTZ GV-Net/IO is an RS-232 to RS-485 Converter which allows you to control PTZ Cameras with your Geovision Surveillance System.
It also has 4 Digital Inputs and 4 Relay Outputs. £35 How to connect | Specification | RS-232 to PC | RJ11 to DB9 female cable | RS-485 + | Connect to GV-IO / PT-811 RS-485+ or Pelco, Ademco, Lilin Dome camera RS-485+ | RS-485 - | Connect to GV-IO / PT-811 RS-485 - or Pelco, Ademco, Lilin Dome camera RS-485 - | INPUT | Input | 4 | Input Signal | 0~5 V DC (floating) / TTL | High State | 5V | Low State | 0V | OUTPUT | Relay Output | 4 | Relay Status | Normal Open | Relay Capacitance | 1A / 30V DC; 0.3A / 125V AC | Relay ON Time | 4ms | Relay Off Time | 4ms | Communication | RS485, 9600 bps | DC IN | DC 5V, 1A | Environmental
Condition | Operation temperature | 0 to 50 degree C | Humidity | 5%~95% (non-condensing) |
|  | Controls GV-System with the Remote Control. £20 | Specifications | Operation Distance | 7 meters | Receiving Angle | ± 30 degrees | Frequency | 38 KHz | Power | R03 size AAA / 1.5V Battery x 2 units (Remote Control) | Dimensions | 53 (W) x 28 (H) x 185 (D) mm (Remote Control) |
| | |
 | 
| * Support hardware-based compression, indicating less CPU usage and higher system performance.
* Provides DVD recording quality. £275 | Specifications | Interface | 40-pin IDE connector | Audio Input | RCA connector x 4 | Number of channels | 4 | Recording Rate | 120 fps (NTSC), 100 fps (PAL) | Video Resolution | NTSC | 720x480 | PAL | 720x576 | Compatible Models | GV-600, GV-650, GV-800, GV-1000 |
|  | The GV-Hub adds 4 RS-232 and 4 RS-485 serial ports to your PC's USB port. The USB solutions for serial port extension is perfect for mobile instrumentation and POS applications.
£95 | Specifications | Serial Interface | RS-232 | Signal: | DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS | Connector: | 4 x DB9 Male (A, B, C, D) | RS-485 | Signal: | D+, D-, GND | Connector: | 4 x Terminal Block (A, B, C, D) | Serial Line Protection | 16 KV ESD for All Signals | USB | Compliance | USB 1.1, 1.0
USB 2.0 Backward Compatible | Speed | Full Speed 12 Mbps | Communication | Parity | None, Even, Odd | Data Bit | 7, 8 | Stop Bit | 1, 2 | Flow Control | RTS/CTS, XON/XOFF | Speed | 600 bps to 115,200 bps | Environmental
Conditions | Operation temperature | 0~55 degree C | Humidity | 5%~95% (non-condensing) | Dimensions | 103 (W) x 30 (H) x 125 (D) mm |
|  | The GV-Keyboard is used to program and operate GV-systems. Through RS-485 configuration, it can control up to 16 additional GV-systems.
£150 | Specifications | Output | RS-232 | DB9 Female | USB | USB 1.1 | RS-485+ | Connects to GV-NET or GV-NET card RS-485+ | RS-485- | Connects to GV-NET or GV-NET Card RS-485- | Communication | RS-232 | 9,600bps | RS-485 | 9,600bps | Power | DC IN | DC 12V 1A | RS-485 | DC 12V | Environmental
Conditions | Operation temperature | 0~50 degree C | Humidity | 5%~95% (non-condensing) | Dimensions | 300 (W) x 45 (H) x 161 (D) mm |
|   | The GV-Loop Through Card is designed to take the video signal directly from the GV Capture Card, without internal device processes, and then split it into 16 signals while maintaining video quality.
£120 | Specifications | Interface | 2 x 40-pin connector | Output interface | 2 x 15-pin D-type ports | 1 x 40-pin connector | Input Signal | 16 channels | Dimensions | 130 (W) x 98 (H) mm | Installation Guide | |
 to Home Digital Surveillance page
|
020 30515202 (UK)
(sales only)